Electrophoretic Deposition of SnO2 Nanoparticles and Its LPG Sensing Characteristics

Creative Commons License


JOURNAL OF SENSORS, vol.2015, 2015 (SCI-Expanded) identifier identifier

  • Publication Type: Article / Article
  • Volume: 2015
  • Publication Date: 2015
  • Doi Number: 10.1155/2015/971473
  • Journal Name: JOURNAL OF SENSORS
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Anadolu University Affiliated: Yes


Homogenized SnO2 nanoparticles (60 nm) in acetylacetone mediums, both with and without iodine, were deposited onto platinum coated alumina substrate and interdigital electrodes using the electrophoretic deposition (EPD) method for gas sensor applications. Homogeneous and porous film layers were processed and analyzed at various coating times and voltages. The structure of the deposited films was characterized by a scanning electron microscopy (SEM). The gas sensing properties of the SnO2 films were investigated using liquid petroleum gas (LPG) for various lower explosive limits (LEL). The results showed that porous, crack-free, and homogeneous SnO2 films were achieved for 5 and 15 sec at 100 and 150 V EPD parameters using an iodine-free acetylacetone based SnO2 suspension. The optimum sintering for the deposited SnO2 nanoparticles was observed at 500 degrees C for 5 min. The results showed that the sensitivity of the films was increased with the operating temperature. The coated films with EPD demonstrated a better sensitivity for the 20 LEL LPG concentrations at a 450 degrees C operating temperature. The maximum sensitivity of the SnO2 sensors at 450 degrees C to 20 LEL LPG was 30.