Akademik Veri Yönetim Sistemi
VETERINARY MEDICINE AND SCIENCE, cilt.10, sa.6, 2024 (SCI-Expanded)
BackgroundThe matrix effect is accepted as one of the critical factors that affect trueness, and it is especially important in the analysis of critical compounds, such as drugs, toxins and pesticides, in complex matrices. Ceftiofur (CEF) is a leading drug used in dairy industry for pulmonary infections. Because milk has a complex matrix, which is rich in fats, proteins and many other compounds, the determination of CEF in milk products deals with issues of trueness. On the other hand, pharmaceuticals also have a complex composition as they contain not only the active pharmaceutical ingredient but also many excipients, such as preservatives and pH modifiers. Due to its frequent use, its residues can be found in meat products or exist as an excreted compound in urine, milk and so on.ObjectiveThe aim of this study was to investigate the effect of different calibration methods on quantitative estimation of CEF in milk and pharmaceutical samples.MethodsCEF was analysed using a new HPLC method, in which separation was achieved on a C18 bonded fused-core silica particle column by using isocratic elution; the method was optimized by testing different chromatographic conditions and validated according to the ICH Q2(R1) and United States Pharmacopeia guidelines.ResultsInterestingly, it was found that CEF signals in milk samples were higher than the ones at the same level prepared in calibration solutions with a ratio of 11.28:1.ConclusionThis finding reveals the necessity of matrix-matched calibration for accurate quantitative determination of CEF in milk samples. Moreover, the milk in the market and the most used pharmaceutical formulations were analysed using the current method. Prepared standard ceftiofur solution is added to 2 mL of milk sample.The solution is stirred for 20 min.For the protein, precipitation was added to 4 mL of acetonitrile to the solution.The heterogeneous solution is stirred and sonicated for 20 min.The solution is centrifuged at 5180 rpm for 15 min.The filtrate is taken and filtered with a 0.22 m PVDF syringe filter.The solutions prepared in this way are injected into the HPLC system, and a calibration curve is obtained. image