Processing and characterisation of three-layer alumina-based composites with enhanced damage tolerance

Arslan G., Janssen R., Claussen N.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, cilt.25, sa.16, ss.3553-3561, 2005 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 25 Sayı: 16
  • Basım Tarihi: 2005
  • Doi Numarası: 10.1016/j.jeurceramsoc.2004.09.016
  • Dergi Adı: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.3553-3561
  • Anahtar Kelimeler: milling, Al2O3, laminates, mechanical properties, wear parts, MECHANICAL-PROPERTIES, CERAMIC COMPOSITE, STRESSES, STRENGTH, TRANSFORMATION, DIFFUSION, ALLOYS, IRON, AL
  • Anadolu Üniversitesi Adresli: Hayır

Özet

Three-layer alumina-based composites reinforced with iron in the inner layer and with chromium in the outer layers were fabricated by first uniaxially pressing the three-layer assembly, followed by cold isostatic pressing at 300 MPa and sintering in a graphite vacuum furnace at 1500 degrees C for 1 h.